AutoPot easy2Propagate Basic Kit | 47 x 21.5 in Tray, 4 Vents

What the AutoPot easy2Propagate Basic Kit Contains Four parts make up the kit. A garden tray measuring 47 by 21.5 in is the base. A clear lid with four fitted vents sits over it. Two pieces of coco matting, each 23 by 20 by 1.2 in, line the tray floor. A root control sheet of 46 by 20 in lays over the matting, gold face up. The whole kit weighs 26 lb. This is the manual-watering version of the easy2Propagate system. Water goes into the tray and the matting holds it. The root control sheet then wicks that water up to the base of whatever is standing on it. Capillary action is doing the watering, which is why the sheet matters as much as the matting does. It keeps roots from growing down into the matting and keeps the tray clean enough to use again. Pots and seed trays both work on it, provided the base is flat and the media touches the sheet. The tray footprint is a bench length rather than a windowsill one, which is what makes this a production tool. The kit's part number is APWS213. Setting Up a Coco Matting Propagator A coco matting propagator wants preparing before anything goes on it. AutoPot asks for the matting to be soaked in pH 4.5 water for twenty-four to forty-eight hours, then rinsed. After that it runs on pH 5.5 water. The root control sheet gets a thirty-minute soak of its own. Skip either step and the mat repels water on the first fill. Lay the matting in, the sheet on top with the gold face up, then set the pots down. Water each cell once from above to start the capillary link between the sheet and the media. Then fill the tray until the matting sits about two thirds submerged. Fit the lid snugly and leave the vents closed at first. The target is 70 to 80 degrees Fahrenheit and at least 80% humidity while roots are forming. Open the vents gradually once seedlings or cuttings have rooted. Opening them early costs humidity, and opening them late invites rot. Rinse the matting and the sheet between runs. Both are reusable, and the one thing that ends their life early is salt left to dry in them. Key Features 47 by 21.5 in garden tray: A bench-length base rather than a windowsill one. Clear lid, four fitted vents: Humidity held in, then let out gradually. Two coco matting pieces: Each 23 by 20 by 1.2 in, lining the tray floor. 46 by 20 in root control sheet: Wicks water up and keeps roots out of the matting. Watering from below: Capillary action rather than a pass with a can. Takes pots or seed trays: Anything flat-based with its media touching the sheet. 26 lb kit: Part number APWS213. Technical Specifications Specification Value Part number APWS213 Garden tray 47 x 21.5 in Lid Clear, with 4 fitted vents Coco matting 2 pieces, 23 x 20 x 1.2 in each Root control sheet 46 x 20 in Watering Capillary, drawn from the tray Fill level Matting about two thirds submerged Matting preparation Soak in pH 4.5 water for 24 - 48 hours, then rinse Running water pH 5.5 Sheet preparation Soak for 30 minutes Target conditions 70 - 80 °F and 80% humidity or above while rooting Weight 26 lb