Home›Cannabis Grow›Grow Equipment›AutoPot easy2grow 2Pot Extension Kit | Two 2.2 Gal Pots, AQUAvalve

In Stock
AutoPot easy2grow 2Pot Extension Kit | Two 2.2 Gal Pots, AQUAvalve
☆☆☆☆☆
Department: Cannabis Grow
$80.09
An AutoPot Expansion Kit, Not a Standalone System
This adds two more sites to an easy2grow run that already exists. It is not a system on its own; there is no reservoir and no tank in the box. The tray holds two 2.2 gallon pots side by side under a single lid.
Purchase directly from Growers HouseAn AutoPot Expansion Kit, Not a Standalone System
This adds two more sites to an easy2grow run that already exists. It is not a system on its own; there is no reservoir and no tank in the box. The tray holds two 2.2 gallon pots side by side under a single lid. An AQUAvalve sits in the tray and does the work. When the tray runs dry the valve opens, refills to a set depth, then closes and waits. That wet and dry cycle needs no pump, no timer and no power at all. Gravity feeds it from whatever tank the parent kit already uses. Two root control discs go under the pots to keep roots out of the valve. A 1.5 m length of quarter-inch pipe comes with it. Two tee fittings let you cut into the existing line.
Plumbing the 2Pot Extension Kit Into a Run
Head height is the thing that catches people out. The tank has to sit above the tray or the valve cannot fill, and a few inches of lift is usually enough. Keep the line short and free of kinks, because narrow pipe does not forgive a tight bend. Feed strength matters more here than in hand-watered pots, because nothing ever flushes. The pots take up what they take up and the salts left behind stay behind. Most growers on this system run a lighter mix and flush the medium on a schedule instead. The honest limit is scale: two sites at a time means a big room turns into a lot of trays. Check the discs each cycle, since a root through the valve is the common failure. Clean the valve between runs and it will outlast the pots.
Key Features
Adds: Two extra sites to an existing easy2grow system
Pots: Two 2.2 gallon pots in one two-pot tray with lid
Valve: A single AQUAvalve runs the cycle without power
Root control: Two root control discs sit beneath the pots
Pipe: A 1.5 m length of quarter-inch pipe is included
Fittings: Half-inch to quarter-inch tee, plus a quarter-inch tee
Power: No pump, no timer and no electricity required
Technical Specifications
Specification
Value
Adds
2 watering sites
Pot size
2.2 gal each
Tray
2Pot tray with lid
Valve
1 x AQUAvalve
Root control discs
2
Pipe
1.5 m of 1/4 in
Fittings
1/2 in to 1/4 in tee, and 1/4 in tee
Power required
None
Reservoir
Not included; supplied by the parent kit






