Autopot AQUAvalve5 or AQUAvalve – 1/4 in

AQUAvalve5 Gravity-Fed Irrigation Valve The AQUAvalve runs on gravity alone, with no pump, timer, or power. It fills a tray to a 1 in depth, shuts off, and refills only after the plants use the supply. That gives true plant-controlled feeding with less over- or under-watering. The AQUAvalve5 adds a 5mm large bore, a 66% bigger inlet for faster fills and fewer blockages. Two Versions for AutoPot Pipework The AQUAvalve5 fits current AutoPot 3/8 in pipework and 1Pot, XL, XL SmartPot, easy2grow, and tray systems. The original AQUAvalve is a direct replacement for older 1/4 in setups. Both run off a gravity reservoir or FlexiTank with simple grommet upgrades where needed. Fewer moving parts than a pumped system make it easy to clean. Key Features Power-free operation: Runs on gravity pressure with no pump, timer, or power. Plant-controlled watering: Fills to 1 in, then refills only after plants use the supply. AQUAvalve5 5mm bore: 66% bigger inlet for faster fills and fewer blockages. Two pipe sizes: AQUAvalve5 for 3/8 in; original AQUAvalve for 1/4 in. Wide compatibility: 1Pot, XL, XL SmartPot, easy2grow, tray, and tank systems. Low maintenance: Fewer moving parts with easy access for cleaning. Technical Specifications Specification Value Type Gravity-fed irrigation valve Operation Power-free (no pump, timer, or electricity) Fill Depth 1 in, plant-controlled refill AQUAvalve5 Bore 5mm large bore (66% bigger inlet) AQUAvalve5 Pipe 3/8 in AutoPot pipework AQUAvalve Pipe 1/4 in (legacy replacement) Compatibility 1Pot, XL, XL SmartPot, easy2grow, tray/tank systems