AutoPot 8Pot System with 25 Gal FlexiTank Pro. 3.9 Gal Pots

Eight Pots and a Pro Tank on the AutoPot 8 Pot System Eight plants in two rows of four share one reservoir and one short, filtered main line. Each square pot holds 3.9 gal of mix and sits in a grommeted 1Pot tray with a lid. An AQUAvalve5 in every tray fills it to about 1 in deep, then shuts off. It stays closed until that plant has used the solution, so each root zone gets a real dry spell. No pump, timer or outlet is needed, because gravity from the tank does all the pushing. The reservoir is a 25 gal FlexiTank Pro, roughly 19 in across and 27.5 in tall when filled. Its skin is reflective and light-tight, which keeps sunlight and grow light out of the nutrient solution. Concealed supports and an anti-tip build keep it standing when full. Capacity lines printed inside the tank make mixing a fresh batch quick and accurate. AutoPot lists this layout as a fit for a 4 x 8 ft tent. Setting Up the FlexiTank Pro Reservoir and Lines The FlexiTank Pro reservoir assembles in minutes, collapses for storage and is made from food-grade materials. Stand it so the tank base sits at least 6 in above the highest valve. A 1/2 in click-fit tank filter connects the outlet to 13 ft of 1/2 in pipe. One inline tap on that main line shuts the feed for refills or filter checks. Four 1/2 to 3/8 in crosses branch off to the trays through 13 ft of 3/8 in pipe. On a raised stand, place the filter further along the 1/2 in pipe rather than tight to the tank. Fill the pots with a light mix, roughly half perlite or pH-stable clay pebbles with coco or soil. Hand-water the transplants, then let roots establish for about a week before the tap opens. Refill the tank when about a third of the solution is left. Never let it run empty. Check the filter weekly and clean it whenever debris shows. Key Features Eight pot sites: Eight 3.9 gal square pots, eight grommeted trays with lids and eight root control pieces. 25 gal FlexiTank Pro: Reflective, light-tight reservoir about 19 x 27.5 in when full. Internal capacity markings: Read the solution level inside the tank while mixing. Anti-tip build: Concealed supports keep the filled tank upright. Two rows of four: Four reducing crosses split the main line to all eight trays. Filtered 1/2 in main: Click-fit tank filter, 13 ft of 1/2 in pipe and one inline tap. AQUAvalve5 in every tray: Each valve refills only after its plant has emptied the tray. Technical Specifications Specification Value Brand AutoPot Model 8Pot System with FlexiTank Pro SKU APWS002P Plant sites 8 Pot volume 3.9 gal (15 L), square Pot size 10.2 in top x 11.8 in tall Tray 1Pot grommeted tray with lid, 13.7 x 9.6 in Reservoir 25 gal FlexiTank Pro Reservoir size, filled 19 in diameter x 27.5 in tall Reservoir features Reflective, light-tight, anti-tip, internal capacity markings Valve AQUAvalve5 (8) Main line 13 ft of 1/2 in pipe Tray feed line 13 ft of 3/8 in pipe Filter 1/2 in click-fit tank filter Fittings 1 inline tap, 4 crosses (1/2 to 3/8 in) Layout 2 rows of 4 Tent fit 4 x 8 ft Minimum tank height 6 in above the highest valve Power required None, gravity-fed