Autopilot Desktop CO2 Monitor

Autopilot Desktop CO2 Monitor and Data Logger This desktop unit tracks CO2, relative humidity, and temperature on one display and logs them to a built-in trend chart. A 2-channel low-drift NDIR sensor reads CO2 to ±50 ppm or ±5% across 0-3000 ppm. The Trend Chart plots the last minutes, hours, or up to 7 days so you see how the room drifts. An audible alarm and three color LEDs flag high or low CO2 at a glance. Logging Grow Room CO2 Without a Wired Controller Power it from any USB source: a wall adapter, a laptop, or a battery pack. It operates from 32 to 122°F and 0-95% RH, so it holds up in a working grow room. A built-in plant directory carries CO2 targets for common crops, with two slots for custom setpoints. Set it on a bench, hang it, or wall-mount it. Key Features 2-channel NDIR sensor: Reads CO2 to ±50 ppm or ±5% across 0-3000 ppm. CO2/RH/temp display: Tracks all three environment values on one clear screen. 7-day Trend Chart: Plots readings over minutes, hours, or up to 7 days. Audible and LED alarms: Flags high or low CO2 with sound and three color LEDs. USB power: Runs off a wall adapter, laptop, or power bank; two cables and an adapter included. Plant CO2 directory: Built-in setpoints for common crops plus two custom slots. Replenish reminder: Estimates CO2 refill timing from the last five days of use. Flexible mounting: Sits on a desktop, hangs, or mounts to a wall. Technical Specifications Specification Value Measurements CO2, relative humidity, temperature CO2 Sensor 2-channel low-drift NDIR CO2 Accuracy ±50 ppm or ±5% (0-3000 ppm); ±7% above 3000 ppm Data Logging Trend chart, 24-hour or 7-day Alarms Audible + 3 color LEDs (high/low CO2) Operating Temperature 32-122°F Operating Humidity 0-95% RH (non-condensing) Power USB (AC adapter 100-240V; 2 cables + adapter included) Mounting Desktop, hanging, or wall