AiroClean420 AIRO-50XL Grow Room Air Purifier, 5,000 cu ft

An Air Sanitation System That Works on Spores, Not Dust Powdery mildew moves through a room on air, not on hands. The AIRO-50XL treats that air rather than straining particles out of it. Contaminated air enters a sealed reaction chamber and passes over thousands of coated rings. High-intensity lamps energise a titanium dioxide coating bound to those surfaces. The reaction forms hydroxyl radicals that break organic contaminants into carbon dioxide and water vapour. Mould, botrytis, bacteria, viruses, allergens and VOCs are the stated targets. AiroClean420 rates exit air at 99.999987% contaminant free. One unit covers up to 5,000 cubic feet of room volume. Draw is 180 W and roughly 2 Amp on a 120V circuit. That coating is self-cleaning and non-depleting, so there is no media cartridge to replace. What a Grow Room Air Purifier Like This Does Not Do Photocatalytic oxidation is not particle filtration, and treating it as such leads to disappointment. Spores that pass through are inactivated rather than captured, so dust and debris stay airborne. Rooms that need particulate control still want a HEPA intake or a carbon scrubber alongside it. The XL adds a protective filter on the inlet side to keep the reaction surfaces cleaner, and that filter is roughly a six-month item. No ozone is produced, and no peroxides or oxygen derivatives are created. Installation is stand-alone: it mounts and plugs in without ducting. Running cost stays low because the only recurring parts are the lamps and that inlet filter. Treat it as a continuous sanitation layer, not a replacement for airflow design. Paired with sound environmental control is where growers report the clearest results. Key Features Coverage: up to 5,000 cubic feet of room volume Technology: photocatalytic oxidation over a self-cleaning titanium dioxide coating No Ozone: no ozone, peroxides or oxygen derivatives created Inlet Pre-Filter: an XL-only protective filter, changed roughly every six months Power: 180 W, about 2 Amp at 120V or 1 Amp at 220V Stand-Alone Install: mounts and plugs in, no ducting required Warranty: 3 years of coverage from AiroClean420 Origin: made in the USA Technical Specifications Specification Value Maximum Room Volume 5,000 cubic feet Technology Photocatalytic oxidation with a self-cleaning TiO2 coating Power Consumption 180 W Recommended Amps 2 Amp at 120V · 1 Amp at 220V Voltage 120V or 220V, pre-set and non-switchable Dimensions 26.75 in x 18.75 in x 8.75 in Weight 32 lbs Power Cord 6 ft Ozone None produced Warranty 3 years Origin Made in the USA