Active Aqua Utility Submersible Pump, 2642 GPH /10,000 LPH

Active Aqua 2642 GPH Submersible Pump for High-Volume Water Transfer The Active Aqua Utility Submersible Pump moves 2,642 gallons per hour (10,000 LPH) at 147W on a standard 120V / 60 Hz circuit, drawing just 1.25A. A 14 ft maximum head height gives it enough lift for multi-tier bench systems, elevated reservoirs, and flood-and-drain setups where vertical push matters. The sealed split tube motor and built-in thermal overload protection let it run continuously without intervention, and UL registration (E353336) confirms third-party electrical safety compliance. Dual-Use Utility Water Pump Built for Nutrient Recirculation This pump operates fully submersed or inline below the waterline, giving growers flexibility across reservoir layouts. The vortex impeller tolerates solids and sediment up to 6 mm particle size, so it won't stall on organic debris or undissolved nutrient salts. Ceramic bearings support the rotor for extended service life, and the removable rotor assembly simplifies cleaning between crop cycles. A 20.5 ft cord (18 AWG) reaches comfortably from floor-level reservoirs to wall outlets without extension cables. Key Features 2,642 GPH / 10,000 LPH Flow Rate: Moves high volumes for large reservoirs, recirculating systems, and commercial flood tables. 14 ft Head Height: Provides enough vertical lift for elevated tanks, multi-level benches, and gravity-return drain setups. Vortex Impeller with 6 mm Solids Handling: Passes sediment, organic matter, and undissolved nutrients without clogging or impeller damage. Ceramic Bearings and Sealed Motor: Rated for continuous duty with full electrical isolation and built-in thermal overload protection. Dual Submersed / Inline Operation: Installs inside the reservoir or plumbed inline below the waterline, adapting to any system layout. Technical Specifications Specification Value Flow Rate 2,642 GPH / 10,000 LPH Head Height 14 ft Wattage 147W Voltage 120V / 60 Hz Amperage 1.25A Impeller Type Vortex Solids Handling Up to 6 mm particle size Bearings Ceramic Cord 18 AWG, 20.5 ft Dimensions (Unit) 14.15L × 6.1W × 7.44H in Weight (Unit) 8.6 lbs Operation Submersed or inline (below water level) Protection Built-in thermal overload Certification UL Registered (E353336)