Active Aqua Stopper for 1/2 in Tubing | AAST50, Black End Plug

What a 1/2 inch Stopper Is For, and Why Not a Kink Closing the end of a line properly is one of those jobs that gets improvised badly. A folded and zip tied tube leaks, a crimp clamp splits the wall, and a self tapping screw is a slow puncture. This is a moulded plug that pushes into a 1/2 in inside diameter line and stays there. The ridge around the body is riveted rather than smooth, which is what stops it walking out under pressure. It is a plug and not a valve, so there is nothing to open or adjust once it is in. Sizing goes by the inside diameter of the tube, not the outside. The part number is AAST50 in black, and there is a three quarter inch version for the larger line. Each one comes on its own rather than bagged in tens. Real Uses on Irrigation Tubing, and How These Fail Irrigation tubing gets extended, shortened and rerouted more often than any other part of a room. A plug at the end of a header lets you cut the run back next season without rebuilding the manifold. During commissioning it is the fastest way to isolate one leg and pressure test the rest. Pulling it out is also how you flush a line properly, sending debris out of the end rather than through every emitter. Keep half a dozen in the spares box, because the one you need is always the one that walked off. Failures come from two directions. Warm tubing softens and stretches, so a plug that sat tight in winter can creep out in a July room. And a pump dead heading into a fully closed run puts far more pressure on the end than a normal feed does. Do not use one as a substitute for a shut off valve on a live pressurised leg. A plug is for a line that is meant to be closed, not for one that gets opened weekly. Key Features What it is: A moulded plastic plug for closing the end of a line Fits: Half inch inside diameter tubing Colour: Black What holds it: A riveted ridge around the body, not friction alone Pack: One piece, not a multi pack Part number: AAST50 Larger size: A three quarter inch version exists in the range Not a valve: There is nothing to open or adjust Handy for: Flushing a line, and pressure testing one leg at a time Watch for: Warm tubing softening, and a pump dead heading into a closed run Technical Specifications Specification Value SKU AAST50 Brand Active Aqua Product Stopper (end plug) Size Half inch, by tube inside diameter Material Plastic Colour Black Retention Riveted ridge around the body Quantity Single piece Other size in range Three quarter inch stopper Function Closes a line permanently; it is not a shut off valve Barcode 638104003506