AC Infinity CLOUDRAY A6 Gen 2 Clip Fan 6 in. 325 CFM, 10 Speeds, IP-54

AC Infinity CLOUDRAY A6 Moves 325 CFM on 7.5 Watts The CLOUDRAY A6 is the Gen 2 clip fan AC Infinity built around a brushless EC motor. It pushes 325 CFM at 31 dBA while drawing 7.5W on 100-240V. That is a fraction of what a comparable AC clip fan pulls. Dual ball bearings and an IP-54 rating keep it running through 85% RH and 140°F. The motor is rated at 67,000 hours. Placing a Grow Tent Clip Fan That Swivels by Hand The head turns through 90 degrees and tilts 55, set by hand and left there. It does not sweep on its own. Growers who want motorized oscillation should look at the CLOUDRAY S6, which is this fan on a powered base. Mount the A6 horizontally or vertically, clip it above the canopy, and start near speed 3 for seedlings. Ten speeds and ten wind modes mean the low end is genuinely low, which matters in propagation. Wired to a UIS controller, its speed tracks temperature or humidity instead of your memory. The clip jaw opens wide enough for a standard tent pole, and the eight-foot cord reaches a controller without an extension. Cleaning is a wipe of the grill between runs. Key Features 325 CFM at 31 dBA: Enough movement for a 4x4 corner without drowning out the room. 7.5W EC Motor: Draws 0.14A, so several units share a circuit with lights and an inline fan. 10 Speeds and 10 Wind Modes: The low end stays gentle enough for fresh cuttings and seedlings. IP-54 Rating: Rated through 85% RH and 140F for late-flower humidity and summer heat. Dual Ball Bearings: Rated to 67,000 hours and cleared for horizontal or vertical mounting. 90 Degree Swivel, 55 Degree Tilt: Aim it once by hand and it holds the angle you set. UIS Controller Ready: Links to AC Infinity controllers and app for climate triggers and timers. Technical Specifications Specification Value Impeller Size 6 in Maximum Airflow 325 CFM Noise Level 31 dBA Static Pressure 25 Pa Voltage 100-240V AC Power Consumption 7.5 W Current 0.14 A Waterproof Rating IP-54 Rotation Range 90° Tilt Angle 55° Oscillation Manual adjustable tilt Fan Bearings Dual ball bearing Mounting Positions Horizontal or vertical Operating Humidity 35 to 85% RH Operating Temperature 32 to 140 °F Life Expectancy 67,000 hours Dimensions 9.73 x 11.82 in (24.7 x 30.0 cm) Cord Length 96 in (8 ft)