10L Neocision ETL Lab Certified Rotary Evaporator

How This 10L Rotary Evaporator Is Configured Both flasks are the same size here, and that matters. Evaporating and receiving capacity are each 10 L, so the receiver will not fill and halt a run before the charge has been worked through. Glass throughout is GG-17 high borosilicate. The condenser is a main plus auxiliary vertical double helix, which gives more surface area and a shorter vapour path than a single coil manages. Rotation is digitally regulated from 20 to 130 RPM with no steps in between. Bath temperature sets from five degrees above ambient up to 99 C, in a 304 stainless bath finished with Teflon against corrosion. Maximum vacuum pressure is -29.8 inHg. The bath lifts on an electric stroke of 190 mm rather than a hand crank. Injection and drain valves let solution feed in and product draw off without breaking vacuum or stopping rotation. ETL certification covers it for laboratory use. Siting and Powering a Rotovap of This Size Check the electrical supply before anything else. The unit runs on 220 to 240 volts, single phase at 60 Hz, and the heater alone draws up to 15 amps. Total consumption for the machine is 3,300 watts. That is a dedicated circuit rather than a spare socket, and it wants confirming with an electrician before delivery day. The footprint is 81 by 44 by 20 inches and the assembled weight is 155 lb. Locking casters are fitted, so it rolls once it is in the room. The warranty is ninety days. Glassware carries no warranty, and any transit damage has to be reported within three days of delivery. Key Features Flasks: Evaporating and receiving both at 10 L, so the receiver keeps up Glass: GG-17 high borosilicate throughout the vapour train Condenser: Main plus auxiliary vertical double helix, on a short vapour path Rotation: Digitally regulated and step-less across 20 to 130 RPM Bath: 304 stainless with a Teflon coating, heating to 99 degrees Celsius Lift: Electric bath lift over a 190 mm stroke, not a hand crank Continuous running: Inject and drain without releasing vacuum or stopping Electrical: 220 to 240 volts single phase, drawing up to 15 amps at the heater Certification: ETL certified for laboratory use Handling: 155 lb on locking casters Technical Specifications Specification Value SKU NRE-10L Brand BVV, Neocision series Model 10L Solvent Pro Series Rotary Evaporator Evaporating flask 10 L Receiving flask 10 L Glass material GG-17 high borosilicate Condenser style Main plus auxiliary vertical double helix Rotation speed 20 to 130 RPM, digital step-less regulation Set temperature Ambient plus 5, up to 99 C Bath material 304 stainless steel, Teflon coated Bath size 17.7 x 9.8 in Maximum vacuum -29.8 inHg Vacuum connection 14 mm / 0.55 in barb Condenser connection 18 mm / 0.70 in barb Lifting Electric, 190 mm / 7.5 in stroke Power supply 220 to 240 V, 60 Hz, single phase Heater max current 15 A Total power 3,300 W Optimum ambient 5 to 25 C / 41 to 77 F Dimensions 81 x 44 x 20 in Weight 155 lb Certifications ETL Warranty 90 days; glassware excluded Transit damage Report within 3 days of delivery